Chapter – 1
Sexual Reproduction in Flowering Plants
1. Flower: The Site of Sexual Reproduction
The flower is the reproductive organ of angiosperms. The androecium (whorl of stamens) is the male part and the gynoecium (pistil) is the female part. Events before fertilisation are called pre-fertilisation events: formation of gametes (gametogenesis) and their transfer (pollination).
2. Stamen, Microsporangium and Pollen Grain
A stamen has a stalk called the filament and a terminal anther. A typical anther is bilobed, each lobe has two theca (dithecous), so it has four microsporangia (tetrasporangiate), which develop into pollen sacs.

Wall layer | Function |
|---|---|
Epidermis | Outer protective layer |
Endothecium | Helps in dehiscence of the anther |
Middle layers | Degenerate at maturity |
Tapetum (innermost) | Nourishes the developing pollen grains; its cells often have more than one nucleus |
Microsporogenesis: Each cell of the sporogenous tissue can act as a pollen mother cell (PMC, 2n), which divides by meiosis to form a microspore tetrad. The microspores separate and develop into pollen grains.
Pollen grain: It has a two-layered wall. The hard outer exine is made of sporopollenin, one of the most resistant organic materials; it has germ pores where sporopollenin is absent. The inner intine is made of cellulose and pectin. A mature pollen grain contains a large vegetative cell and a small generative cell. In over 60% of angiosperms pollen is shed at this 2-celled stage; in others, the generative cell divides to form two male gametes before shedding (3-celled stage).
Example: Pollen of rice and wheat loses viability within about 30 minutes of release, while pollen of some members of Rosaceae, Leguminosae and Solanaceae remains viable for months. Pollen can be stored for years in liquid nitrogen at -196°C (pollen banks).
Remember: Pollen of some plants such as Parthenium (carrot grass) causes allergies and respiratory problems; pollen tablets are also used as food supplements.
3. The Pistil, Megasporangium (Ovule) and Embryo Sac
The pistil has three parts: stigma (landing platform for pollen), style and ovary. Inside the ovary, ovules arise from the placenta.
Parts of an ovule: funicle (stalk), hilum (junction of ovule and funicle), integuments (protective layers), micropyle (small opening at the tip), chalaza (basal part opposite the micropyle), nucellus (mass of cells with reserve food) and embryo sac (female gametophyte).
Megasporogenesis: A megaspore mother cell (MMC) in the nucellus divides by meiosis to form four megaspores. In most flowering plants, one megaspore is functional and three degenerate. This method of development from a single megaspore is called monosporic development.
Female gametophyte: The nucleus of the functional megaspore divides mitotically three times to form 8 nuclei. Six become cells (3 at each end) and two remain as polar nuclei in the central cell. Thus a typical embryo sac is 7-celled and 8-nucleate.

Exam point: Synergids have special thickenings at the micropylar tip called the filiform apparatus, which guide the pollen tube.
4. Pollination
Pollination is the transfer of pollen grains from the anther to the stigma of a pistil.

Chasmogamous flowers have exposed anthers and stigma; cleistogamous flowers never open and are invariably autogamous. Some plants such as Viola, Oxalis and Commelina produce both types.
Outbreeding devices discourage self-pollination: (1) pollen release and stigma receptivity are not synchronised; (2) anther and stigma are placed at different positions; (3) self-incompatibility, a genetic mechanism that prevents self-pollen from fertilising ovules; (4) production of unisexual flowers. In dioecious plants like papaya, male and female flowers are on different plants, preventing both autogamy and geitonogamy. In monoecious plants like castor and maize, autogamy is prevented but geitonogamy is possible.
5. Pollen-Pistil Interaction and Artificial Hybridisation
The pistil can recognise compatible pollen. Compatible pollen germinates on the stigma to produce a pollen tube, which grows through the style, enters the ovule through the micropyle and then enters one of the synergids. Incompatible pollen is rejected.
Artificial hybridisation uses only the desired pollen. It involves emasculation (removing anthers from a bisexual flower before they dehisce) and bagging (covering the flower with a bag to prevent contamination). When the stigma becomes receptive, the desired pollen is dusted and the flower is rebagged.
6. Double Fertilisation

Important: Because two fusions (syngamy and triple fusion) occur in an embryo sac, the process is called double fertilisation. It is unique to flowering plants. The central cell after triple fusion becomes the primary endosperm cell (PEC) with the primary endosperm nucleus (PEN, 3n).
7. Post-fertilisation Events
Endosperm: Endosperm develops before the embryo and nourishes it. In the common free-nuclear type, the PEN divides repeatedly without cell wall formation. The coconut water of a tender coconut is free-nuclear endosperm, and the white kernel is cellular endosperm.
Embryo: The zygote develops at the micropylar end into a proembryo, then globular, heart-shaped and mature embryo stages.

A monocot embryo has one cotyledon called the scutellum; the radicle and root cap are enclosed in a sheath called the coleorhiza, and the shoot apex and leaf primordia in the coleoptile.
Feature | Albuminous seed | Exalbuminous (non-albuminous) seed |
|---|---|---|
Endosperm in mature seed | Retained | Completely used up during embryo development |
Examples | Wheat, maize, barley, castor | Pea, groundnut |
In some seeds, such as black pepper and beet, remnants of the nucellus persist; this is called the perisperm.
Seed and fruit: Ovules become seeds and the ovary becomes the fruit. In apple, strawberry and cashew, the thalamus also contributes to the fruit (false fruits). Parthenocarpic fruits such as banana develop without fertilisation. Seeds may remain dormant and viable for very long periods; seeds of the date palm (Phoenix dactylifera) about 2000 years old have been found viable.
8. Apomixis and Polyembryony
Apomixis is the production of seeds without fertilisation; it is a form of asexual reproduction that mimics sexual reproduction (seen in some species of Asteraceae and grasses). Apomictic hybrid seeds would help farmers, as hybrid characters would not segregate and seeds could be reused.
Polyembryony is the occurrence of more than one embryo in a seed, as in many citrus and mango varieties.
Easy Memory Trick: Embryo sac “3 + 2 + 3 = 8 nuclei; 3 + 1 + 3 = 7 cells”.
9. Important Questions
Q1. Why is an anther called tetrasporangiate?
Ans. Because a typical bilobed, dithecous anther has four microsporangia, two in each lobe.
Q2. What is the function of the tapetum?
Ans. It nourishes the developing pollen grains.
Q3. Name the substance of exine and state one property.
Ans. Sporopollenin; it is highly resistant to high temperature, strong acids and alkalis, and no enzyme is known to degrade it.
Q4. Describe the structure of a typical embryo sac.
Ans. It is 7-celled and 8-nucleate: an egg apparatus (one egg and two synergids) at the micropylar end, three antipodal cells at the chalazal end, and a large central cell with two polar nuclei.
Q5. Differentiate between geitonogamy and xenogamy.
Ans. In geitonogamy pollen is transferred to another flower of the same plant; in xenogamy it is transferred to a flower of a different plant.
Q6. What is double fertilisation?
Ans. The occurrence of two fusions in the embryo sac: syngamy (male gamete + egg = zygote) and triple fusion (male gamete + two polar nuclei = PEN).
Q7. Why is papaya considered to avoid both autogamy and geitonogamy?
Ans. Because it is dioecious; male and female flowers are borne on different plants.
Q8. What are emasculation and bagging?
Ans. Emasculation is removal of anthers before dehiscence; bagging is covering the emasculated flower to prevent contamination by unwanted pollen.
Q9. What is apomixis? Why is it useful?
Ans. Production of seeds without fertilisation; apomictic hybrids would keep hybrid characters, so farmers could reuse seeds every year.
Q10. Name the parts of a monocot embryo.
Ans. Scutellum (cotyledon), embryonal axis, coleoptile (enclosing the shoot apex) and coleorhiza (enclosing the radicle and root cap).
Conclusion: Sexual reproduction in flowering plants involves pollen and embryo sac formation, pollination, double fertilisation and the development of seed and fruit, which ensure variation and survival of the species.