Practicals
Practicals (Physics, Chemistry and Biology)
1. About the Practical Exam
The Class 10 Science practical exam carries 20 marks. You perform experiments from the list below, record observations in a proper table, draw labelled diagrams, write the result and precautions, and answer viva questions. Keep your practical file neat and complete.
General format for every experiment: Aim → Materials required → Theory (one or two lines) → Procedure → Observations (table) → Result/Conclusion → Precautions.
Physics
2. Experiment 1: Focal length of a concave mirror and a convex mirror
(A) Concave mirror. Theory: rays from a very distant object are almost parallel; after reflection they meet at the focus, so the image distance is nearly equal to the focal length.
Procedure: Fix the concave mirror on a stand and face it towards a distant object (a tree or building seen through the window). Move a white screen in front of the mirror until a sharp, inverted, diminished image is formed. Measure the distance between the mirror and the screen with a metre scale. Repeat three times and take the mean.
| Observation no. | Distance between mirror and screen (cm) |
| 1 | f1 |
| 2 | f2 |
| 3 | f3 |
Result: mean focal length f = (f1 + f2 + f3)/3.
(B) Convex mirror. A convex mirror forms a virtual image that cannot be caught on a screen. So a convex lens is used to help. First, a convex lens forms a real image of a distant object (or a lighted object) on a screen. The convex mirror is then placed between the lens and the screen and moved until the light reflected from it forms a sharp image back on the object itself (rays strike the mirror normally and retrace their path). The distance from the mirror to the earlier screen position is the radius of curvature R, and f = R/2.
Precautions: the object should be very far away; the mirror and screen should be vertical; the image should be sharp; take the reading from the pole of the mirror.
3. Experiment 2: Path of a ray through a rectangular glass slab
Procedure: Place the glass slab on a white sheet fixed on a drawing board and draw its outline. Draw a normal at a point on one face, and an incident line at an angle (say 30°). Fix two pins on the incident line. Look through the opposite face and fix two more pins so that all four pins appear in a straight line. Remove the slab, join the points to get the emergent ray and the refracted ray inside the slab. Measure ∠i, ∠r and ∠e. Repeat for 45° and 60°.
| ∠i | ∠r | ∠e |
| 30° | — | — |
| 45° | — | — |
| 60° | — | — |
Result: ∠r is less than ∠i (light bends towards the normal on entering glass). ∠e is equal to ∠i, so the emergent ray is parallel to the incident ray but shifted sideways (lateral displacement).
Precautions: pins should be vertical and at least 5 cm apart; look at the feet of the pins; do not move the slab during the experiment.
4. Experiment 3: Dependence of current on potential difference (Ohm’s law)
Circuit: battery, plug key, ammeter, rheostat and the resistor in series; voltmeter in parallel across the resistor.
Procedure: Close the key and adjust the rheostat to get small current. Note the ammeter (I) and voltmeter (V) readings. Change the rheostat to take at least four readings. Plot a graph of V (y-axis) against I (x-axis).
| S. no. | V (volt) | I (ampere) | R = V/I (Ω) |
| 1 | 0.5 | 0.1 | 5 |
| 2 | 1.0 | 0.2 | 5 |
| 3 | 1.5 | 0.3 | 5 |
| 4 | 2.0 | 0.4 | 5 |
(Sample readings for illustration; record your own.)
Result: the V–I graph is a straight line through the origin, so V ∝ I (Ohm’s law). Resistance = slope of the graph = 5 Ω in the sample.
Precautions: connections should be tight; the ammeter must be in series and the voltmeter in parallel, with + terminals towards the + of the battery; current should flow only for a short time so the resistor does not heat up.
5. Experiments 4 and 5: Equivalent resistance in series and parallel
Series: connect two resistors R1 and R2 end to end with the ammeter and battery; connect the voltmeter across both. Find Rs = V/I. Compare with R1 + R2.
Sample: R1 = 2 Ω, R2 = 3 Ω. Readings V = 2.5 V, I = 0.5 A, so Rs = 5 Ω = 2 + 3. Verified.
Parallel: connect R1 and R2 between the same two points; voltmeter across them; ammeter in the main line. Find Rp = V/I. Compare with R1R2/(R1 + R2).
Sample: R1 = 6 Ω, R2 = 3 Ω. Readings V = 2 V, I = 1 A, so Rp = 2 Ω = (6 × 3)/(6 + 3). Verified.
Result: in series, total resistance is the sum of the resistances; in parallel, total resistance is less than the smallest resistance.
Chemistry
6. Experiment 6: pH of different samples
Procedure: Take the samples in clean test tubes. Dip a strip of pH paper (or add a few drops of universal indicator) in each. Compare the colour with the pH colour chart.
| Sample | Expected pH (approx.) | Nature |
| Dilute hydrochloric acid | 1–2 | Strongly acidic |
| Dilute NaOH solution | 12–14 | Strongly basic |
| Dilute ethanoic acid | 3–4 | Weakly acidic |
| Lemon juice | 2–3 | Acidic |
| Water | 7 | Neutral |
| Dilute sodium bicarbonate solution | 8–9 | Weakly basic |
Precautions: use a fresh strip or clean dropper for each sample; compare colours in good light; handle acids and bases carefully.
7. Experiment 7: Properties of acids and bases (HCl and NaOH)
| Test | With dil. HCl | With dil. NaOH |
| Blue litmus | Turns red | No change |
| Red litmus | No change | Turns blue |
| Zinc granules | Bubbles of H2 (burns with pop sound): Zn + 2HCl → ZnCl2 + H2 | H2 on warming: Zn + 2NaOH → Na2ZnO2 + H2 |
| Solid sodium carbonate | Brisk effervescence of CO2 (turns lime water milky) | No reaction |
8. Experiment 8: Reactivity of Zn, Fe, Cu and Al
Procedure: Take four sets of test tubes with ZnSO4, FeSO4, CuSO4 and Al2(SO4)3 solutions. Put cleaned pieces of each metal in each solution and observe after some time.
| Metal ↓ / Solution → | ZnSO4 | FeSO4 | CuSO4 | Al2(SO4)3 |
| Zn | — | Reacts | Reacts | No reaction |
| Fe | No reaction | — | Reacts | No reaction |
| Cu | No reaction | No reaction | — | No reaction |
| Al | Reacts | Reacts | Reacts | — |
Result: decreasing order of reactivity: Al > Zn > Fe > Cu. (Aluminium may react slowly at first because of its protective oxide layer; rub it with sandpaper before use.)
9. Experiment 9: Properties of acetic acid (ethanoic acid)
| Property | Observation |
| Odour | Pungent, vinegar-like smell |
| Solubility in water | Mixes completely; clear solution |
| Effect on litmus | Blue litmus turns red (acidic) |
| With sodium bicarbonate | Brisk effervescence of CO2: CH3COOH + NaHCO3 → CH3COONa + H2O + CO2 |
Precaution: smell by wafting the vapour towards the nose with your hand, never by direct sniffing.
Biology
10. Experiment 10: Temporary mount of a leaf peel to show stomata
Procedure: Peel a thin layer from the lower surface of a leaf (e.g. Bryophyllum or money plant). Place it in a watch glass with water, stain with safranin, wash off the extra stain, put it on a slide with a drop of glycerine and cover with a cover slip without trapping air bubbles. Observe under the microscope.
Observation: many small pores (stomata), each surrounded by two kidney-shaped guard cells with chloroplasts.
11. Experiment 11: CO2 is given out during respiration
Procedure: Put germinating seeds in a conical flask. Hang a small test tube with KOH solution inside the flask. Close the flask with a cork having a bent glass tube, whose other end dips into water in a beaker. Mark the water level and set it aside for 1 to 2 hours.
Observation: the water rises in the bent tube.
Conclusion: the seeds give out CO2 during respiration; KOH absorbs it, creating a partial vacuum in the flask, so water is pulled up.
12. Experiment 12: Light is necessary for photosynthesis
Procedure: Keep a potted plant in the dark for 2 to 3 days to remove starch (de-starching). Cover part of a leaf on both sides with black paper strips and place the plant in sunlight for a few hours. Pluck the leaf, remove the paper, boil it in water, then in alcohol (on a water bath) to remove chlorophyll. Wash and add iodine solution.
Observation: the uncovered part turns blue-black; the covered part does not.
Conclusion: starch was formed only in the part that received light, so light is necessary for photosynthesis.
Precaution: never heat alcohol directly on a flame; use a water bath.
13. Experiment 13: Binary fission in Amoeba and budding in yeast
- Amoeba (prepared slide): the nucleus elongates and divides into two; the cytoplasm then divides, forming two daughter Amoebae.
- Yeast (prepared slide): small outgrowths (buds) appear on the parent cell; some buds have further buds, forming a chain.
Draw labelled diagrams of what you see.
14. Experiment 14: Percentage of water absorbed by raisins
Procedure: Weigh some dry raisins (W1). Soak them in water for about 2 hours. Take them out, wipe off surface water with blotting paper and weigh again (W2).
Formula: Percentage of water absorbed = (W2 − W1) / W1 × 100
Sample: W1 = 10 g, W2 = 14 g. Water absorbed = (14 − 10)/10 × 100 = 40%.
Theory: raisins absorb water by endosmosis, because the water outside is less concentrated than the sugary cell sap inside.
15. Viva Questions
Q1. Why is the image of a distant object used to find the focal length of a concave mirror?
Ans. Rays from a distant object are almost parallel and meet at the focus after reflection.
Q2. What is the relation between ∠i and ∠e in a glass slab?
Ans. They are equal.
Q3. Why is an ammeter connected in series?
Ans. So that the whole current passes through it; it has very low resistance.
Q4. Why is KOH used in the respiration experiment?
Ans. It absorbs the CO2 given out by the seeds.
Q5. Why is the leaf boiled in alcohol before the starch test?
Ans. To remove chlorophyll, so that the blue-black colour of the iodine test can be seen clearly.
Q6. What is the colour of copper sulphate solution, and what happens when an iron nail is placed in it?
Ans. It is blue; it turns pale green and a reddish-brown copper coating forms on the nail.
Q7. What is the function of guard cells?
Ans. They open and close the stomata to control gas exchange and loss of water.
16. Conclusion
Practicals help you see the theory in action: mirrors and lenses form images, current follows Ohm’s law, acids and bases react in predictable ways, and plants need light to make food. Careful observation, neat tables and correct precautions bring full marks.