Chapter – 3
Metals and Non-metals
1. Introduction
Elements are classified as metals (iron, copper, aluminium, gold) and non-metals (carbon, sulphur, oxygen, iodine). Some elements like silicon and germanium show properties of both and are called metalloids.
2. Physical Properties
| Property | Metals | Non-metals |
| Lustre | Shiny (metallic lustre) | Dull (except iodine) |
| Hardness | Generally hard (Na, K are soft, cut with a knife) | Generally soft (diamond is the hardest natural substance) |
| Malleability | Beaten into thin sheets (gold, silver best) | Brittle |
| Ductility | Drawn into wires (gold most ductile) | Not ductile |
| Conductivity | Good conductors of heat and electricity (silver, copper best; lead, mercury poor) | Poor conductors (graphite conducts electricity) |
| Sonority | Sonorous (make a ringing sound) | Not sonorous |
| State | Solid (mercury is liquid) | Solid or gas (bromine is liquid) |
| Melting point | High (gallium and caesium melt on the palm) | Low |
3. Chemical Properties of Metals
- With oxygen: Metal + O2 → Metal oxide (basic). 2Mg + O2 → 2MgO. Some oxides like Al2O3 and ZnO react with both acids and bases; they are amphoteric oxides. Al2O3 + 6HCl → 2AlCl3 + 3H2O; Al2O3 + 2NaOH → 2NaAlO2 + H2O.
- Na and K react so vigorously with air that they are stored in kerosene. Mg, Al, Zn, Pb form a protective oxide layer. Silver and gold do not react with oxygen even at high temperature.
- With water: Metal + Water → Metal hydroxide/oxide + H2. Na and K react violently with cold water; Ca reacts less violently (floats due to hydrogen bubbles); Mg reacts with hot water; Al, Fe, Zn react with steam (3Fe + 4H2O → Fe3O4 + 4H2); Pb, Cu, Ag, Au do not react.
- With acids: Metal + Dilute acid → Salt + H2. Hydrogen is not evolved with nitric acid (except with Mg and Mn and very dilute HNO3) because HNO3 is a strong oxidising agent.
- Aqua regia: 3 parts conc. HCl + 1 part conc. HNO3. It dissolves gold and platinum.
- With salt solutions: A more reactive metal displaces a less reactive metal. Zn + CuSO4 → ZnSO4 + Cu.
4. Reactivity Series
Metals arranged in decreasing order of reactivity:
K > Na > Ca > Mg > Al > Zn > Fe > Pb > [H] > Cu > Hg > Ag > Au
Easy Memory Trick: “Please Send Cats, Monkeys And Zebras In Large Hired Cars Making Silly Groans” = K, Na, Ca, Mg, Al, Zn, Fe (Iron), Pb (Lead), H, Cu, Hg (Mercury), Ag (Silver), Au (Gold).
Metals above hydrogen displace hydrogen from dilute acids; metals below hydrogen (Cu, Hg, Ag, Au) do not.
5. Ionic Compounds
Metals lose electrons to form positive ions (cations); non-metals gain electrons to form negative ions (anions). The force of attraction between them is an ionic (electrovalent) bond.
Formation of NaCl: Na (2,8,1) loses 1 electron → Na+ (2,8). Cl (2,8,7) gains 1 electron → Cl− (2,8,8). Na+ and Cl− attract to form NaCl.
Formation of MgCl2: Mg (2,8,2) loses 2 electrons → Mg2+; two Cl atoms each gain 1 electron → 2Cl−.
Properties of ionic compounds:
- Solid and hard, but brittle, because of strong attraction between ions.
- High melting and boiling points (lots of energy needed to break the strong bonds).
- Generally soluble in water, insoluble in kerosene and petrol.
- Conduct electricity in molten state or in solution (ions move), not as solids.
6. Occurrence and Extraction of Metals (Metallurgy)
Minerals are natural compounds of metals in the earth’s crust. Minerals from which a metal can be extracted profitably are ores. Impurities like soil and sand are called gangue.
Steps of metallurgy:
- Enrichment (concentration) of ore: removing gangue by physical or chemical methods (e.g. froth flotation, magnetic separation).
- Extraction of metal: depends on reactivity.
- Low reactivity (Hg, Cu): heating the sulphide ore alone. 2HgS + 3O2 → 2HgO + 2SO2; 2HgO → 2Hg + O2.
- Middle reactivity (Zn, Fe, Pb): sulphide ores are roasted (heated strongly in excess air) and carbonate ores are calcined (heated in limited air) to get oxides. The oxide is then reduced with carbon: ZnO + C → Zn + CO. Some oxides are reduced by more reactive metals like aluminium (thermit reaction: Fe2O3 + 2Al → 2Fe + Al2O3 + heat, used to join railway tracks).
- High reactivity (Na, Mg, Ca, Al): by electrolytic reduction of molten chlorides or oxides. The metal deposits at the cathode.
- Refining: purifying the metal. Electrolytic refining: impure metal is the anode, a thin strip of pure metal is the cathode, and a salt solution of the metal is the electrolyte. Pure metal deposits on the cathode; insoluble impurities settle below the anode as anode mud.
7. Corrosion and Its Prevention
- Silver turns black (silver sulphide), copper gets a green coat (basic copper carbonate), iron gets rust (hydrated iron(III) oxide). Rusting needs both air and water.
- Prevention: painting, oiling, greasing, galvanising (coating iron with zinc), chrome plating, anodising, and making alloys.
Alloys are homogeneous mixtures of a metal with other metals or non-metals.
| Alloy | Composition | Use |
| Stainless steel | Iron + nickel + chromium (+ carbon) | Utensils, does not rust |
| Brass | Copper + zinc | Utensils, fittings |
| Bronze | Copper + tin | Statues, medals |
| Solder | Lead + tin | Welding electrical wires (low melting point) |
| Amalgam | Mercury + another metal | Dental fillings |
Pure gold is 24 carat and very soft; jewellery gold is usually 22 carat (22 parts gold + 2 parts copper or silver).
8. Important Questions
Q1. Why is sodium kept immersed in kerosene oil?
Ans. It reacts vigorously with oxygen and moisture in air and can catch fire; kerosene keeps air away.
Q2. What are amphoteric oxides? Give two examples.
Ans. Oxides that react with both acids and bases to give salt and water, e.g. Al2O3 and ZnO.
Q3. Why do ionic compounds have high melting points?
Ans. Strong forces of attraction between oppositely charged ions need much energy to break.
Q4. Name two metals that are found free in nature.
Ans. Gold and silver (also platinum and copper sometimes).
Q5 (long). Explain the electrolytic refining of copper with a labelled description.
Ans. A thick block of impure copper is the anode and a thin strip of pure copper is the cathode, both dipped in acidified copper sulphate solution. On passing current, copper from the anode dissolves into the solution, and an equal amount of pure copper deposits on the cathode. Soluble impurities stay in the solution; insoluble impurities collect below the anode as anode mud.
Assertion–Reason: A: Copper does not give hydrogen with dilute HCl. R: Copper is below hydrogen in the reactivity series.
Ans. Both true; R explains A.
9. Conclusion
Metals and non-metals differ in physical and chemical properties. The reactivity series helps us predict reactions and choose how to extract a metal from its ore. Corrosion can be prevented by protective coatings and alloys.