Disaster Management (Together Towards a Safer India) | Chapter – 5
Safe Construction Practices
1. Introduction
It is often said that earthquakes do not kill people; unsafe buildings do. Most deaths in earthquakes, cyclones and floods happen because buildings collapse. Safe construction can greatly reduce losses. This is especially important in Himachal Pradesh, large parts of which fall in the highest earthquake risk zones of India. The Kangra earthquake of 1905 killed about 20,000 people.
2. Why Buildings Fail
- Poor-quality materials and workmanship; not following building codes.
- Buildings on unsafe sites: steep slopes, filled-up land, riverbeds, landslide-prone areas.
- Irregular shapes and heavy roofs; large openings weakening walls.
- No proper connections between walls, floors and roofs, so parts separate during shaking.
- Adding extra floors without checking the foundation.
3. Earthquake-safe Construction
- Building codes: the Bureau of Indian Standards (BIS) has codes for earthquake-resistant design and construction. Builders, engineers and owners must follow them.
- Seismic zones: India is divided into seismic zones according to earthquake risk; buildings in higher zones need stronger design.
- Simple, regular shapes: square or rectangular plans behave better than L, T or U shapes.
- Seismic bands: continuous reinforced concrete bands at plinth level, lintel level (above doors and windows) and roof level tie the walls together like a belt.
- Vertical reinforcement at corners and junctions of walls and beside openings.
- Light roofs where possible; heavy roofs increase earthquake forces.
- Good foundation on firm ground; avoid soft or filled soil.
- Doors and windows should be small and placed away from corners.
- Traditional wisdom: traditional Himalayan building styles like kath-kuni in Himachal Pradesh, which use alternate layers of wood and stone without mortar, have survived many earthquakes because the wood makes the walls flexible.
4. Construction Safe from Other Hazards
| Hazard | Safe practices |
| Floods | Build on raised plinths or stilts; avoid riverbeds and flood plains; use water-resistant materials; keep drains clear |
| Cyclones | Strong anchoring of roofs to walls; sloping roofs (pyramid shape) resist wind better; avoid large overhangs; plant shelter belts; build community cyclone shelters |
| Landslides | Avoid building on steep or unstable slopes and near streams; build retaining walls; proper drainage of surface water; plant trees and grass on slopes; avoid cutting the toe of slopes |
| Fire | Fire-resistant materials; wide exits and staircases; fire extinguishers; safe electrical wiring |
5. Retrofitting
Retrofitting means strengthening existing buildings to make them safer against hazards. Examples: adding seismic bands, steel bracing, strengthening columns and walls, improving foundations. It is especially important for schools, hospitals and other public buildings that must remain usable after a disaster.
6. School Safety
- School buildings should be built to safety codes and checked regularly.
- Heavy almirahs and shelves should be fixed to walls; nothing heavy should be kept on high shelves.
- Exits and corridors should be wide and clear; doors should open outwards.
- Mock drills: during an earthquake, practise Drop, Cover and Hold: drop to the floor, take cover under a sturdy desk, and hold on until the shaking stops; then evacuate calmly to an open ground away from buildings, trees and electric poles.
7. Important Questions
Q1. “Earthquakes do not kill people; unsafe buildings do.” Explain.
Ans. Most deaths in earthquakes are caused by buildings collapsing on people, not by the ground shaking itself.
Q2. What are seismic bands?
Ans. Continuous reinforced concrete bands at plinth, lintel and roof levels that tie walls together and make a building resist earthquakes.
Q3. What is retrofitting?
Ans. Strengthening an existing building to make it safer against hazards.
Q4 (long). Suggest safe construction practices for a house in a hilly, earthquake-prone area like Himachal Pradesh.
Ans. Choose a site on firm ground, away from steep slopes, landslide zones and stream banks. Follow BIS earthquake-resistant codes. Use a simple rectangular plan, a strong foundation and good-quality materials. Provide seismic bands at plinth, lintel and roof levels and vertical reinforcement at corners. Keep openings small and away from corners. Use a light roof. Build retaining walls and drains to protect from landslides. Learn from traditional kath-kuni construction, which uses wood and stone layers for flexibility.
8. Conclusion
Safe construction is the most effective way to reduce deaths in disasters. Following building codes, choosing safe sites, retrofitting old buildings and learning from traditional methods make homes and schools safer.