About this game
How to play Networking Lab
Networking Lab is a mini network simulator, like a small Packet Tracer that runs in your browser. You drag PCs, laptops, servers, switches and routers onto a desk, plug them together with cables, set their IP addresses and run real commands such as ping, ipconfig, arp and tracert. Every packet is drawn as a coloured envelope travelling along the cables, so you can see exactly what a network does when you press Enter.
🎯 What it teaches
- How devices on one network find each other with ARP, and why the first ping takes longer.
- How a switch learns MAC addresses and forwards frames, and why it floods broadcasts to every port.
- IP addresses, subnet masks and default gateways, and what happens when one of them is wrong.
- How a router joins different networks, why TTL drops by one at every router, and how static routes work.
- Reading real Windows command output, including Request timed out, Destination host unreachable and General failure.
🕹️ How to play
- Start with the eight missions, which go from two PCs and one cable up to two routers with static routes and a full school lab.
- Add devices by clicking them or dragging them onto the desk, then pick 🔌 Cable, click one device, choose a port and click the next device.
- Click a PC to type its IP address, mask and gateway, or click a router to set each interface and add routes.
- Open a PC's Command Prompt and type ping followed by an address. Watch the envelopes and read the packet log underneath.
- Once you're confident, open Free build and design any network you like. It is saved in your browser.
💡 Tips
- Use Slow speed the first time you ping across a router. You will see the ARP question, the switch and the router hand the packet along.
- If a ping fails, run ipconfig on both computers and compare them line by line. Most faults are a wrong address, mask or gateway.
- Remember that a ping has to come back too. The far computer also needs a correct gateway.
- Missions give three stars when you finish without hints, so try on your own first.
👥 Who it is for
Networking Lab is for students taking a computer networking course, Class 11 and 12 computer science students, and anyone preparing for CCNA-style basics. Teachers can use it on a projector to show what really happens inside a LAN, which makes it a good companion to a hands-on wired lab.
Free to play on computermafia.com. No sign-up, nothing to install.
